Developed for the Temerario’s High-Revs and High Drama. The Lamborghini Temerario introduces an extraordinary combination of hybrid performance and combustion-engine character. Its 4.0-liter twin-turbo V8 can reach 10,000 rpm, giving the car an unusually broad rev range and a compelling foundation for an expressive exhaust note. The VANTA ROSE GOLD F1 Race Exhaust is developed to make that progression more prominent: stronger V8 presence as the engine comes under load, a sharper character through the midrange, and greater intensity as the revs climb.
The factory exhaust serves a wide range of driving situations, including those that call for reduced volume. VANTA ROSE GOLD is built around the demands of an owner seeking a dedicated race configuration. Its priorities are direct sound delivery, compact construction, and an open rear exhaust path that allows more of the engine’s character to reach the driver.
AURUM FLOW CORE™ at the Center. Our signature AURUM FLOW CORE forms the centerpiece of the assembly, bringing Yonristic’s sound-focused engineering into a compact exhaust developed for the Temerario. The central routing and short outlet sections are designed together, with the objective of producing a cohesive, increasingly urgent exhaust character as engine speed and load rise.
The acoustic direction is distinctly exotic: a forceful V8 presence that develops into a sharper, more metallic upper register. The core provides the system’s central design identity, while the direct exits allow that character to remain exposed throughout combustion-engine operation. For drivers seeking an F1-inspired soundtrack, this configuration places high-RPM expression at the center of the experience.
A Dedicated Place in the VANTA Family. VANTA ROSE GOLD sits between VANTA Edition and VANTA GOLD as a special application focused on track sound, reduced hardware, and its own visual identity. It brings the AURUM FLOW CORE into a permanently open race configuration, finished in rose-gold ceramic and built exclusively from AISI 304 stainless steel. Every major design decision supports that purpose, from the removal of rear muffler chambers to the compact outlet arrangement.
Non-Valved, Straight-Through Race Layout. This system removes the rear muffler bodies, operating exhaust valves, and alternate quiet-flow routing. Exhaust travels through the central race assembly and exits through two direct outlet tubes, without a valve redirecting it through a silenced path. Removing those rear components reduces their contribution to exhaust restriction and sound attenuation.
The sound remains assertive whenever the combustion engine is running. Under acceleration, the system is developed to expose more of the V8’s high-frequency character and turbocharged intensity, creating a stronger rise in sound as the engine works toward the top of its rev range. This is a permanently open configuration with no selectable quiet mode—an intentional part of its track-focused design.
Exclusively AISI 304 Stainless Steel. The VANTA ROSE GOLD F1 Race Exhaust is manufactured exclusively from AISI 304 stainless steel, selected for its corrosion resistance and suitability for exhaust fabrication. This material forms the foundation of the exhaust body, supporting the compact routing, welded transitions, and direct outlet arrangement.
The stainless-steel construction is complemented by carefully positioned connections and mounting supports that make the assembly a complete vehicle-specific component. Its premium appearance comes from the visible execution of those details: consistent fabrication, defined transitions, integrated flex sections, and the signature ceramic finish applied over the rigid exhaust body.
Reduced Mass Through Simpler Architecture. The weight-conscious approach begins with the layout. Eliminating the rear silencer bodies, valve mechanisms, and additional routing associated with a quiet mode reduces the hardware required behind the engine. The remaining assembly concentrates on the core, inlet connections, supports, and outlets.
This creates the opportunity for meaningful weight reduction while retaining stainless-steel construction. The benefit comes from the physical simplification of the rear exhaust assembly; final weight savings depend on the factory components being replaced and the completed installation.
Signature Rose-Gold Ceramic Treatment. The rigid stainless-steel exhaust body receives our distinctive rose-gold ceramic coating, giving the core and surrounding pipework a warm metallic finish. The coating forms part of the system’s thermal-management approach and is intended to help limit radiant heat exposure around the rear exhaust area, reducing its contribution to heat soak in nearby components.
The ceramic treatment follows the contours of the pipework without the bulk of external wrapping, preserving the compact appearance of the assembly. Exposed metallic flex sections and mounting supports provide a clean visual contrast to the coated body. Appropriate shielding and component clearances remain essential to managing exhaust heat within the vehicle.
Paired Flex Sections for Thermal Movement. Each inlet path incorporates a braided flex section to help accommodate movement as the engine vibrates and the exhaust expands and contracts through temperature changes. These flexible connections complement the rigid central assembly, providing movement accommodation close to the inlet interfaces.
The side supports and mounting brackets position the exhaust within the intended factory layout. Together, the flexible inlet sections and dedicated supports help the assembly manage movement while maintaining its installation alignment. They are functional details that matter in a compact exhaust exposed to repeated heating and cooling.
Exhaust Valve Simulator Included. Every VANTA ROSE GOLD F1 Race Exhaust includes the simulator solution for this non-valved configuration. The simulator connects to the relevant factory exhaust-valve actuator wiring and is designed to provide the expected electrical response when the original actuators are no longer used. It addresses supported valve-monitoring faults associated specifically with removing the factory exhaust valves.
The simulator is included as part of the conversion to a permanently open exhaust. Its role is specific to exhaust-valve monitoring: catalyst-efficiency, oxygen-sensor, and OPF-related faults are separate and are not addressed by this module.
One Integrated Assembly. Direct Bolt-On Installation. The exhaust is supplied as a complete integrated assembly designed to connect at the original rear-exhaust interfaces and use the intended factory mounting locations. The paired inlet connections, built-in flexible sections, and dedicated side supports provide a defined installation layout. No cutting or installation welding is required.
Professional installation should include checking connection seals, mounting alignment, surrounding clearances, and the secure placement of the simulator and wiring. The finished installation brings together a compact stainless-steel race exhaust, the AURUM FLOW CORE, and a distinctive rose-gold ceramic body—developed for owners who want the Temerario’s sound to be a central part of every combustion-driven lap.